KJT-Textile Yarn Capacitive Switch/Sensor NPN/PNP NC
Specification :
| Model number |
KJT-DU3B ZNB |
NC |
NPN 3 wires |
| Model number |
KJT-DU3B ZPB |
NC |
PNP 3 wires |
| Housing material |
Aluminum |
| Sensing method |
Capacitive |
| Ambient tempreature |
-20°C~80°C |
| Control output |
200mA |
| Protection degree |
IP67 |
- Installment pitch of holes
|
35.5mm(holeφ4mm) |
| Type |
Wire device |
| Opreating voltage |
24V DC+/-4 |
| Objects can be detected |
Yarn, cotton thread, silk thread |
| Feeling silk speed |
50m/min-3000m/min |
Features:
1)Standard 24-volt DC supply (working normally within 18-30 volt range);
2)Output form:NPN/PNP;
3)Built-in direct control signal system;
4)It is suitable for winding tube, twisting thread, blending wire and composite fiber deformation.
Basical functions:
Yarn breaking sensor can detect the running (linear motion) of various types of spinning on the spinning machine. When the spinning stops or breaks, the capacitive yarn sensor can inform the automatic control system of the spinning machine in time.
According to the actual situation (determined by the model of the spinning machine), the yarn sensor MCL1 can directly drive the automatic wire cutter connected with itself to cut off the weft at the corresponding position.
Control signal can also be sent to automatically stop the corresponding spinning machine working position. In an alarm state, MCL1 alerts field operators with flashing signals from leds.
Capacitive yarn sensor is suitable for spinning made of all materials that can carry electrostatic charge. For elastane materials, the MCL1 series also provides a special model (which can monitor low speed spinning motion).
Opreating principle:
The capacitive yarn sensor probe can monitor the voltage signal generated by the electrostatic charge carried by the spinning itself in the process of motion and judge the working condition of the spinning according to its change. The detection accuracy of capacitive yarn sensor is not affected by dust. However, adverse working conditions such as oil contamination or severe vibration will reduce the detection accuracy of MCL1.
Safety instruction:
The wire sensor is mainly used for real-time detection of thin lines at high speeds.
No disconnection, it is widely used in high-speed winding heads in textile and chemical fiber equipment,
Bomb machine, etc. It uses the photoelectric system for detection, using non-contact inspection
The measuring method has the advantages of reliable performance and long service life. This series of products
Easy to install and convenient, it can be interchanged with imported products.
Product Tags:
|
|
Metal Wire Yarn Detector Sensor 24vdc Pnp Output For Textile Machinery Images
|
